Intel SR1520ML manual Installing a PCI Riser Card, Installing Riser Card onto Riser Assembly

—Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly” on page 22.

Installing a PCI Riser Card

1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information” on page iii.

2.Power down the server and unplug all peripheral devices and the AC power cable.

3.Remove the server system cover. For instructions, see “Removing the Server System Cover”.

4.Disconnect any cables attached to any add-in cards.

5.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly” on page 21.

6.Remove any add-in cards from the PCI riser connector. For instructions, see “Removing a PCI Add-in Card” on page 27.

7.Use two screws to attach the riser card to the riser assembly. See the figure below.

A

B

AF002650

Figure 17. Installing Riser Card onto Riser Assembly

8.Choose the appropriate action:

—Install a PCI add-in card if desired. For instructions, see “Installing a PCI Add- in Card” on page 26.

—Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly” on page 22.

Intel® Server System SR1520ML User’s Guide 25