Installing and Removing the Rack Handles
Installing the Rack Handles
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information” on page iii.
2.Power down the server and unplug all peripheral devices and the AC power cable.
3.Attach the rack handle to the server system with two screws as shown in the figure below.
A
B
AF002527
Figure 43. Installing the Rack Handle
4.Repeat step 3 on the opposite side of the server.
5.Plug all peripheral devices and the AC power cable into the server.
Intel® Server System SR1520ML User’s Guide | 55 |
