
D
C
A
B
AF002511
Figure 41. Installing Front Panel Board
12.Tuck the USB and SATA cables into place under the lip at the front of the system.
13.If you removed the power supply, set it back into place.
14.Route the power cables into the cable harness.
15.Install the server system cover. For instructions, see “Installing the Server System Cover”.
16.Plug all peripheral devices and the AC power cable into the server.
Replacing the CMOS Battery
Caution: The CMOS battery is NOT hot swappable. Before removing or replacing the CMOS battery, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet.
52 | Intel® Server System SR1520ML User’s Guide |