20 Intel® Server System SR1520ML User’s Guide
Figure 13. Installing the Drive Carrier
12. If you lifted out the power supply to access the drive bracket screws, set the power
supply back into place.
13. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
Installing an Intel® Z-U130 Value Solid State Drive
Caution: The Intel® VSSD is NOT hot swappable. Before removing or replacing the Intel® VSSD,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 14.
4. Follow the instructions in the document titled Intel® Z-U130 Value Solid State
Drive Mounting Kit Installation Guide for Intel® Server Systems.
AF002509
B
A