3.Remove the server system cover. For instructions, see “Removing the Server System Cover”.
4.Disconnect all power cables connected to the server board and peripherals. See Figure 29:
—From each server board, disconnect the main power cable. This connector is labeled P1 for the board on the right, and P2 for the board on the left. See letters “A” and “B” in the following figure
—From each hard drive, disconnect the power cable. The connector to the top drive is labeled P3 and the connector to the bottom drive is labeled P4. See letters “C” and “D” in the figure.
.
A | B | D |
| C | |
|
| AF002580 |
Figure 29. Disconnecting Power Cables
38 | Intel® Server System SR1520ML User’s Guide |
