Intel® Server System SR1520ML User’s Guide 35
Figure 26. Removing the Processor
11. Continue with the steps under “Installing the Processor”.
Installing the Processor
These steps assume you have just removed your heat sink and processor and your server
system is powered down and unplugged. If this is not true, see “Removing the Heat Sink
and Processor” on page 33 before following these steps.
Caution: Do not touch the socket pins; they are very sensitive and easily damaged.
1. Remove the processor from the packaging box and remove the protective shipping
cover.
2. Orient the processor with the socket so the processor cutouts match the socket
notches, then set the processor into place.
AF000416