Intel SR1520ML manual Removing a PCI Add-in Card, Removing an Add-In Card

9.Connect any necessary cables to the add-in card. See your add-in card documentation for information.

10.Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly” on page 22.

Removing a PCI Add-in Card

1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information” on page iii.

2.Power down the server and unplug all peripheral devices and the AC power cable.

3.Remove the server system cover. For instructions, see “Removing the Server System Cover” on page 14.

4.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly” on page 21.

5.Remove the screw at the rear of the riser assembly. See letter “A” in Figure 19. Save this screw. You will use it later.

6.Pull the add-in card from the roser assembly socket. Use caution so you do not twist or bend the card. See letter “A” in the figure.

7.If you are not installing a replacement add-in card, install a filler panel over the opening at the rear of the riser assembly.

8.Re-install the screw you removed in step 5. See letter “B” in the figure.

B

A

AF002514

Figure 19. Removing an Add-In Card

Intel® Server System SR1520ML User’s Guide 27