| C |
D | B |
| |
A |
|
| DIMM Socket B2 |
| DIMM Socket B1 |
| DIMM Socket A2 |
| DIMM Socket A1 |
| AF002519 |
Figure 22. Installing Memory DIMMs
6.Make sure the clips at both ends of the DIMM socket(s) are pushed outward to the open position. See letter “A” in Figure 22.
7.Holding the DIMM by the edges, remove it from its
8.Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket. See letter “B” in the figure.
9.Insert the bottom edge of the DIMM into the socket. See letter “C” in the figure.
10.When the DIMM correctly positioned, push down on the top edge of the DIMM until the retaining clips snap into place.
11.Make sure the clips are firmly in place. See letter “D” in the figure.
12.Install the processor air duct. For instructions, see “Installing the Processor Air Duct” on page 29.
13.Install the server system cover. For instructions, see “Installing the Server System Cover”.
Intel® Server System SR1520ML User’s Guide | 31 |
