48 Intel® Server System SR1520ML User’s Guide
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 14.
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 28.
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 21.
6. Place the server board into the server system as shown by letter “A” in the figure
below.
7. Attach the server board with six screws. See letter “B” in the figure.
Figure 38. Installing the Server Board
8. Install the processor and the heat sink. For instructions, see “Installing the
Processor” on page 35.
9. Install the system memory. For instructions, see “Installing DIMMs” on page30.
AF002521
A
B