Bay Technical Associates 304, 303 manual Type 2 in the command line

Using the BayStack 303 and 304 Ethernet Switches

5.Type 2 in the command line.

This action refreshes the screen and displays the current IP subnet mask address value.

6.Enter the IP subnet mask address.

This action refreshes the screen and displays the new IP subnet mask address value in the field on the menu.

7.Type 3 in the command line.

This action refreshes the screen and displays the current default gateway address value.

8.Enter the default gateway address.

This action refreshes the screen and displays the new value in the field on the menu.

9.Type 1 at the System Configuration menu.

The Switch Network Configuration menu is displayed (see Figure 2-11). From this menu, the IP address and Telnet password can be set.

2-20 893-01010-A