Bay Technical Associates 304, 303 manual Installing a Metal Chassis in a Rack

Using the BayStack 303 and 304 Ethernet Switches

1 2

7530FB

1 = Flush with rack

2 = Extended from rack

Figure 2-1. Positioning the chassis in the rack

Installing a Metal Chassis in a Rack

To install the metal switch chassis in a 19-inch rack, you need to determine the exact location and position of the switch in the rack. The mounting brackets shipped with the metal chassis allow the positioning of the switch to be adjusted to accommodate your needs. The design also requires that the top cover mounting screws along both sides of the chassis be removed to accommodate the rack mounting bracket.

To install a metal chassis in a rack, follow these steps:

1.Locate the appropriate mounting holes on both sides of the switch.

The bracket can be installed at any position along the side of the chassis using the existing top cover mounting screw holes. Determine how far you want the switch to protrude in front of the rack by sliding the mounting bracket along the side of the switch chassis (see Figure 2-1).

a.Remove the screws from the holes that are to be used for the bracket.

b.Position the mounting bracket over the empty holes (see Figure 2-2).

c.Reinsert the screws to secure the mounting bracket to the chassis.

2-4 893-01010-A