Bay Technical Associates 304, 303 manual Power Cord Specifications, Power and Status LEDs

Using the BayStack 303 and 304 Ethernet Switches

Table 1-3.	Front-panel LEDs (continued)
Type	Label	Color	State	Meaning
100 Mb/s speed	100	Green	On	Port is operating at 100 Mb/s.
indicator *
			Off	Port is operating at 10 Mb/s.
Half/full-duplex *	F Dx	Green	On	10/100 Mb/s port is operating in full-duplex mode
				(simultaneous transmit and receive).
			Off	10/100 Mb/s port is operating in half-duplex mode
				(transmit or receive).

* Indicator applies to 10/100BASE-TX port only (port 13 on BayStack 304 and port 25 on BayStack 303).

The unit AC power supply status LED and the system status LED work together to provide status information. Table 1-4 provides the meaning of the two LEDs.

Table 1-4.	Power and Status LEDs
Power	Status	Meaning
Off	Off	System off.
On	Off	System fault detected by power-up diagnostics.
On	Blinking	System is powered on and performing self-tests or network
		configuration.
On	On	Normal operation.

Power Cord Specifications

For installation outside North America, make sure you have the proper power cord for your region. Any cord used must have a CEE-22 standard V female connector on one end and must meet the IEC 320-030 specifications.

Caution: Use only power cords with a grounding path. Without a proper ground, a person touching the unit is in danger of receiving an electrical shock. Lack of a grounding path to the unit may result in excessive conducted or radiated emissions.

1-8 893-01010-A