Bay Technical Associates 304, 303 manual Port Configuration, Spanning Tree Configuration

Using the BayStack 303 and 304 Ethernet Switches

Port Configuration

The Port Configuration menu allows the user to define the functions of the high-speed ports. On the BayStack 303 switch, this menu addresses ports 25 and

26.On a BayStack 304 switch, this menu addresses ports 13 and 14. Options provided on the Port Configuration menu are:

1---Port #xx

Where xx is either port #13 or #25 depending on the BayStack switch.

2---Port #xx MDA

Where xx is either port #14 or #26 depending on the BayStack switch.

You use these menus to manually set the speed and duplex mode of each high-speed port or to enable autonegotiation. Selecting either 1 or 2 displays the following questions:

Enter Port Autonegotiation Mode (1:enable 2:disable): [Enabled]

Enter Port Speed (1:100 2:10): [100]

Enter Port Duplex Mode (1:half 2:full): [Half Duplex]

As each question is displayed, enter the number corresponding to your needs.

Note: The Enter Port Speed option does not apply to a fiber MDA and is not displayed when a 100BASE-FX MDA is installed. The fiber MDA does not operate at 10 Mb/s.

Spanning Tree Configuration

The Spanning Tree Configuration menu provides the following two menus:

•General Configuration

•Port Configuration

3-14 893-01010-A