Motorola BSR 2000 manual Load-balancing static no load-balancing static

Release 1.0 CMTS Commands

load-balancing static

Static upstream load balancing evenly distributes cable modems across multiple upstream channels serving the same geographical community or Spectrum Group. Load balancing is based on the cable modem count on each upstream channel. Static load balancing means that the BSR will only attempt to move a cable modem to another upstream channel after the modem’s registration process is complete.

The load-balancing static command enables static load balancing for a Spectrum Group. The no load-balancing static command disables static load balancing.

Group Access

MSO

Command Mode

Cable Spectrum Group

Command Line Usage

load-balancing static no load-balancing static

Command Default

Disabled

Note: The load-balancing static command cannot move cable modems registered with a TLV type 2. To move cable modems registered with a TLV type 2, you must use the cable modem ucc command.

526363-001-00 Rev. B MGBI 11-155