Motorola BSR 2000 manual Em event-disable-mask 0x00000000-0xffffffff

Release 1.0 PacketCable Commands

em event-disable-mask

The em event-disable-maskcommand specifies a hexidecimal mask to disable event messages. The no em event-disable-maskcommand restores the default setting.

The following table describes the QoS event message bit definitions. These hexidecimal values can also be combined. For example, QoS_Release and QoS_Commit event messages can be disabled by entering the hexidecimal number: 0x00040080.

Event Message	Bit Definition (1 Based)	Hexidecimal value
QoS_Reserve	7	0x00000040
QoS_Release	8	0x00000080
Time_Change	17	0x00010000
QoS_Commit	19	0x00040000

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

em event-disable-mask <0x00000000-0xffffffff>

Command Syntax

0x00000000-0xffffffffset bits correspond to event message IDs

being disabled

Command Default

0x00000000 (which is no mask)

526363-001-00 Rev. B MGBI 16-25