The receiver will always generate an exact reproduction of the source signal if the Fixed Resolution setting is set to “OFF”.
The fixed resolution setting should be used if the monitor resolution on the receiver is not capable of displaying the resolution sent by the transmitter. If the transmitter is connected to a KVM switch with several CPUs with different video resolutions, setting the receiver to a fixed resolution eliminates the need for the receiver to adjust to the sent resolution when switching between CPUs. The received image will display faster when switching between CPUs if you use a fixed resolution setting on the receiver. Refresh rates of 60Hz are best for LCD displays; 75Hz for CRT’s.
Use the arrow keys to select the needed fixed resolution setting and refresh rate, then press [Enter] to accept the new setting.
The brightness / contrast menu enables you to adjust:
Brightness |
| Contrast |
| Back level |
|
|
Figure 4. Brightness/Contrast menu
Use the arrow keys to select the brightness, contrast, or back level Icon and press [Enter]. The adjustable scroll bar will display. Use the left and right arrow keys to increase or decrease the values.
CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL |
| 9 |
|
|
|
|
|
