Rose electronic CAT5 manual Applying power

Applying power

Plug in the provided power adapters to a 110/220-volt source and to the power connector on the transmitter and receiver Unit. Only use the power adapter provided. GND and earth should not be connected. Mount ferrite rings in the DC lines to protect against electromagnetic interference. Boot up the connected CPU and wait for it to completely boot-up.

The two LEDs on each side of the CAT5 cable connector indicate the following:

Red LED, communication status

ƒOff – no communication errors

ƒSlow blinking – one or more communication errors occurred over a 60- minute period.

ƒFast blinking – Several communication errors occurred over a 60-minute period.

Green LED, Link status

ƒOn – power is on and link connection is locked.

ƒBlinking – CAT5 cable not connected or damaged.

The two LEDs next to the power connector indicate the following:

ƒBoth LEDs on – system booted correctly.

ƒOnly one LED on – unknown video mode being used.

18 CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL