BSR 2000 Command Reference Guide

Release 1.0

 

 

bridge cable modem

The bridge cable modem command designates a particular cable modem as a bridging CM and associates its CPE traffic to a specified VLAN.

Group Access

All

Command Mode

Global Configuration

Command Line Usage

bridge cable modem <mac> <2-4094> [stackable]

Command Syntax

mac

cable modem MAC Address in the form

 

xxxx.xxxx.xxxx

2-4094

the VLAN ID

stackable

allows stacking of multiple IEEE 802.1Q tags

Note: VLAN ID 1 is reserved for use by the attached Layer 2 switch/router for management purposes and as the default "native" VLAN for that equipment. VLAN ID 1 may not be configured on the BSR for Ethernet port tagged routing or for cable modem Layer 2 bridging.

17-2

MGBI

526363-001-00 Rev. B

Page 1036
Image 1036
Motorola BSR 2000 manual Bridge cable modem mac 2-4094 stackable, Stackable