Release 1.0 | Routing Policy Commands |
|
|
match ip address
The match ip address command matches the destination and source IP address or other fields of the IP header on packets with a standard or extended access list allocated. The no match ip address command disables policy routing on packets. This command can also be used for filtering routes based on the destination network of the route.
Use the match ip address command to match any routes that have a source network number and a destination network number address that a standard or extended access list permits. To match both source and destination numbers, use an extended access list. The match ip address command can also be used to filter routing information.
Group Access
ISP
Command Mode
Route Map Configuration
Command Line Usage
match ip address
Command Syntax
standard access list number | |
extended access list number |
MGBI |
