Motorola BSR 2000 manual Iuc

Release 1.0 CMTS Commands

iuc

The iuc command is used to completely configure a modulation profile without having to enter individual IUC submodes.

Group Access

MSO

Command Mode

Modulation Profile Configuration

Command Line Usage

iuc {a-long a-short a-ugs initial long request short station} [atdma mtdma scdma tdma] {128qam 16qam 256qam 32qam 64qam 8qam qpsk} {<0-16>}{<16-253>} {fixed short} {<0-255>} {off on} {<0x0-0x7fff>} {off on} {none qpsk0 qpsk1} {<0-1536>}{<0-2048>}{<0-2048>}{<0-32>} {off on} {<0-128>} {off on}

no iuc {a-long a-short a-ugs initial long request short station} [atdma mtdma scdma tdma] {128qam 16qam 256qam 32qam 64qam 8qam qpsk} {<0-16>}{<16-253>} {fixed short} {<0-255>} {off on} {<0x0-0x7fff>} {off on} {none qpsk0 qpsk1} {<0-1536>}{<0-2048>}{<0-2048>}{<0-32>} {off on} {<0-128>} {off on}

526363-001-00 Rev. B MGBI 11-153