Motorola BSR 2000 manual Show cable qos svc-flow param-set X/Y

Release 1.0 CMTS Commands

show cable qos svc-flow param-set

The show cable qos svc-flowparam-setcommand displays parameter settings for all service classes configured on an individual CMTS slot and port or all CMTS modules on the BSR.

The following is typical output from the show cable qos svc-flowparam-setcommand:

Interface index:	294658
Qos service flow id:	1
Qos parameter set type:	Active
Qos parameter set bit map:	0xdc800000
Qos active timeout:	0
Qos admitted timeout:	200
Qos scheduling type:	Best Effort
Qos traffic priority:	5
Qos max traffic rate:	96000
Qos max traffic burst:	3044
Qos min reserved rate:	64000
Qos min reserved pkt size:	300
Qos max concatenated burst:	1522
Qos tos AND mask:	0xff
Qos tos OR mask:	0x0
Qos req/trans policy:	0x0

Group Access

All

Command Mode

All modes except User EXEC

Command Line Usage

show cable qos svc-flow param-set [X/Y] [<1-4292967295>]

Command Syntax

X/Y	X is 0. Y is the port number.
1-4292967295	service flow ID

526363-001-00 Rev. B MGBI 11-229