BSR 2000 Command Reference Guide | Release 1.0 |
|
|
The following is typical output from the show cable modem
Interface | Prim | Connect | Timing Rec | Ip Address | Mac Address | ||
|
| Sid | State | Offset | Power |
|
|
Cable | 4/1/D1U1 6 | online(pt) | 581 | 0.1 | 150.31.101.44 | 000b.0643.3716 | |
Cable | 4/1/D1U1 9 | online(pt) | 581 | 0.1 | 150.31.101.45 | 000b.0643.3b60 | |
Cable | 4/1/D1U1 1 | online(pt) | 583 | 0.3 | 150.31.101.21 | 000b.0643.3b84 | |
Cable | 4/1/D1U1 2 | online(pt) | 583 | 0.1 | 150.31.101.17 | 000b.0643.3b90 | |
Cable | 4/1/D1U1 8 | online(pt) | 581 | 0.0 | 150.31.101.15 | 000b.0643.3bb2 | |
Cable modem connectivity states are as follows:
init(r1) | CM sent initial ranging parameters. |
init(r2) | CM is ranging. |
init(rc) | ranging is complete. |
dhcp(d) | DHCP Discover was sent by CM. |
dhcp(o) | DHCP Offer was received. |
dhcp(req) | DHCP Request was sent by CM. |
dhcp(ack) | DHCP Ack was received, IP address was |
| assigned by DHCP server. |
init(o) | option file transfer was started. |
init(t) | |
online | CM registered; enabled for data. |
online(d) | CM registered, but network access for the |
| CM is disabled. |
online(un) | CM registered, but not enabled data. Fail |
| to verify modem's identity by BPI module. |
online(pk) | CM registered; baseline privacy interface |
| (BPI) enabled, and key encryption key |
| (KEK) is assigned. |
online(pt) | CM registered; BPI enabled, and traffic |
| encryption key (TEK) is assigned. |
reject(m) | CM did attempt to register; registration |
| was refused due to bad mic. |
| MGBI |
