
BSR 2000 Command Reference Guide | Release 1.0 |
|
|
docstest type
The docstest type command allows you to specifiy the type of DOCSIS 2.0 test to be used through a series of enumerated test modes. The enumerated test mode selected with the docstest type command corresponds to an integer "TYPE" field in the DOCSIS 2.0 Testing MIB’s CM/CMTS TLV Table.
Note: DOCSIS 2.0 test mode must be enabled with the docstest enable command before a DOCSIS 2.0 test type can be specified.
Group Access
MSO
Command Mode
Privileged EXEC
Command Line Usage
docstest type
Command Syntax
the enumerated test mode corresponding to an | |
| integer "TYPE" field in the DOCSIS 2.0 |
| Testing MIB’s CM/CMTS TLV Table |
Slot/Port | Slot is always 0 for the BSR 2000. Port is the |
| CMTS port number. |
LINE | specifies the data required for the test - up to |
| 510 characters can be entered with first two |
| characters being the length and value of the |
| data that follows - the length and value |
| correspond to the LENGTH and VALUE |
| fields from the DOCSIS 2.0 Testing MIB’s |
| CM/CMTS TLV Table |
MGBI |