Panasonic CX-D3000U Installation Guide, Installation hardware, Required tools, Overview

Installation Guide

WARNING

The installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of the potential dangers involved in attempting to install this product.

Any attempt to install this product in a motor car by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury or death.

E

N

G

L

I

S

H

28

❐Installation hardware

No.	Item	Diagram Q’ty
1	Tapping screws	4
	(5 mm·k16 mm)
2	Binding-Head Screws	4
	(M5k6 mm)
3	L-shaped brackets	2
4	Power connector	1
	(5 m)
5	Clamp connector	1
6	Cord clamp	1
7	RCA cord	1
	(3 m)
8	Double-sided tape	1

Caution:

≥This product operates with a 12 V DC nega- tive ground auto battery system only. Do not attempt to use it in any other system. Doing so could cause serious damage.

Before you begin installation, look for the items which are packed with your product.

≥Warranty Card…Fill this out promptly.

≥Panasonic Servicenter List for Service Directory …Keep for future reference in case the product needs servicing.

❐Required tools

You’ll need a screwdriver, and the following:

12 V DC	Electrical	Side-cut
test bulb	tape	pliers

❐ Overview

This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps:

(Please refer to the “WARNING” statement above.)

≥Identify and label the car wires.

≥Connect the car wires to the wires of the power connector.

≥Check the operation of the product.

If you encounter problems, please consult your nearest professional installer.

37

CX-D3000U