E N G L I S H
3
Disc Operations
Preparation | 1 Open the cover. |
Check the monitor connection setting. (page
Turn the car’s ignition switch ACC or ON.
(ACC indicator†1 lights.)
ACC indicator†1
ACC
ON
Remote control signal receiver†2
†1 ACC indicator lights when the remote control signal receiver is connected. (page 40)
†2 The remote control signal receiver is not used when the remote control is operated through the monitor unit. (page 40, 42)
Slot illumination
Green : No disc is in the player.
Red : A disc is already loaded.
≥Place your forefinger behind the protrusion on the top of the cover, and pull the cover toward you.
Turn the monitor switch to ON.
| [∫] (STOP) |
[PWR] | [1] (PLAY) |
(power) |
|
When a disc is already loaded:
Remote control unit
≥ Turn the power on.
Caution:
≥The player can only play the following types of discs: DVD video, video CD, CD and
≥If a disc contains both
≥Refer to page 34 about notes on
≥Refer to page 32 about notes on MP3.
≥Do not use irregularly shaped discs.
≥Do not use discs that have a seal or label attached.
≥Do not insert the foreign object into the disc slot.
This system is designed so that you cannot see
the moving picture while you are driving.
Warning
When driving please enjoy sound only
≥Park your car in a safe place with pulling the side brake (parking brake) lever before watch- ing the monitor.
Note:
≥Operations vary according to the disc. For details, refer to the guide provided with the disc.
≥If you record too many folders and files onto a disc, it may take some time before playback starts.
≥When it is difficult to hear comparatively small sound (such as movie dialogue), setting “Minimum” (page
24)will make those sounds easier to hear (only Dolby Digital encoded material).
≥When “/” is displayed, the operation is prohibited by the unit or disc.
12
