SAlways stop the unit when work is delayed or when walking from one cutting location to
another.
SIf you strike or become entangled with a for- eign object, stop the engine immediately and check for damage. Have any damage repaired by an authorized service dealer before attempting further operations. Dis- card blades that are bent, warped, cracked or broken.
SStop the unit immediately if you feel exces- sive vibration. Vibration is a sign of trouble. Inspect thoroughly for loose nuts, bolts or damage before continuing. Contact an au- thorized service dealer for repair or re- placement of affected parts as necessary.
SNOW THROWER SAFETY
WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes.
WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.
WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow
SDirect material discharge away from glass enclosures, automobiles, etc.
SDo not run engine at high speed while not
removing snow.
SBe attentive when using the snowthrower, and stay alert for holes in the terrain and
other hidden hazards.
SMake sure the rotor will spin freely before at-
taching the snowthrower to the powerhead.
SIf the rotor will not rotate freely due to frozen
ice, thaw the unit before thoroughly before attempting to operate under power.
SKeep the rotor clear of debris.
SDo not throw snow near other people. The snow thrower could propel small objects at high speed causing injury.
SAfter striking a foreign object, stop the en- gine, disconnect spark plug and inspect the
snowthrower for damage and repair if nec- essary before restarting unit.
SNever operate the snowthrower near glass enclosures, automobiles and trucks.Never
attempt to use the snowthrower on a roof.
SNever operate the snowthrower near win- dow wells, dropoffs, etc.
SNever discharge snow onto public roads or near moving traffic.
SClear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from
steep slopes.
SLet snowthrower run for a few minutes after
clearing snow so moving parts do not freeze.
SLook behind and use care when backing
up. Exercise caution to avoid slipping or fal- ling, especially when operating in reverse.
SKnow how to stop quickly.
ASSEMBLY
WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.
Examine parts for damage. Do not use dam- aged parts.
It is normal for the fuel filter to rattle in the empty fuel tank.
Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.
INSTALLING TRIMMER ATTACHMENT CAUTION: When installing trimmer attach-
ment, place the unit on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Coupler
Shipping
protectorLOOSEN
Knob
TIGHTEN
2.Remove shipping protector from coupler.
3.Remove the shaft cap from the trimmer attachment (if present).
4.Position locking/release button of attach- ment into guide recess of coupler.
5.Push the attachment into the coupler until the locking/release button snaps into the primary hole.
7
