Motorola BSR 2000 manual Cable upstream active-codes

Release 1.0 CMTS Commands

cable upstream active-codes

The cable upstream active-codescommand specifies the number of active codes allowed for an S-CDMA channel type. The active codes value must be a non prime number. Increasing the number of allowed active codes provides more transmission channel capacity. Reducing the number of active codes takes advantage of the S-CDMA spreader processing gain at the expense of channel capacity.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <X/Y> active-codes <64-128>no cable upstream <X/Y> active-codes <64-128>

Command Syntax

X/Y	the upstream port and logical channel number
	(0-3)
64-128	the total number of allowed active codes

526363-001-00 Rev. B MGBI 11-71