Motorola BSR 2000 manual Show running-config

BSR 2000 Command Reference Guide Release 1.0

show running-config

The show running-configcommand displays configuration information currently running on the BSR.

Group Access

All

Command Mode

All modes except User EXEC

Command Line Usage

show running-config [interface [cable loopback <1-64>]] [ {begin exclude count-only}]]

<X/Y> ethernet <X/Y> gigaether <X/Y> include} {<WORD>} [ {count

show running-config [interface [cable <X/Y> ethernet <X/Y> gigaether <X/Y> loopback <1-64>]] [ {count count-only}]

show running-config [bgp verbose] [ {begin exclude include} {<WORD>} [ {count count-only}]]

show running-config [bgp verbose] [ {count count-only}]

Command Syntax

interface	display running configuration information on all
	interfaces or a specific interface card
cable X/Y	X is 0. Y is the cable port number on the BSR.
ethernet X/Y	X is 0. Y is the Ethernet/Fast Ethernet IEEE 802.3 port
	number on the BSR.
gigaether X/Y	X is 0. Y is the Gigabit Ethernet port number on the
	BSR.
loopback 1-64	the loopback interface number
bgp	Border Gateway Protocol parameters
verbose	runs the show running-config command in verbose
	mode

1-140 MGBI 526363-001-00 Rev. B