Release 1.0

CMTS Commands

 

 

cable downstream trap-enable-if

The cable downstream trap-enable-if command enables the ifLinkUpDownTrapEnable trap for a downstream channel. The ifLinkUpDownTrapEnable trap indicates whether a link up or link down trap should be generated. The cable downstream no trap-enable-if command disables the ifLinkUpDownTrapEnable trap.

Group Access

All

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable downstream <0-0>trap-enable-if no cable downstream <0-0>trap-enable-if

Command Syntax

0-0

Downstream port number.

Command Default

Disabled

526363-001-00 Rev. B

MGBI

11-23

Page 569
Image 569
Motorola BSR 2000 manual Cable downstream trap-enable-if