Release 1.0

PacketCable Commands

 

 

em retry-count

If an Accounting-Response event message is not received by the BSR from the Record Keeping Server, the BSR sends the event message again. Once all retries are exhausted, the BSR tries an alternate Record Keeping Server (if one is available). The network and the Record Keeping Server should be examined to determine the reason for these timeouts.

The event message retry count can be specified depending on the amount of network congestion and the distance between the BSR and the Record Keeping Server. For example, if network congestion causes reported timeouts in the Account Request Failure field in the show packet-cable statistics command output, the event message retry count may need to be changed.

The em retry-countcommand specifies the number of retries that should occur before the BSR tries an alternate Record Keeping Server. The no em retry-countcommand restores the default setting.

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

em retry-count <0-16>no em retry-count <0-16>

Command Syntax

0-16

maximum number of retransmissions for each

 

Record Keeping Server

Command Default

3

526363-001-00 Rev. B

MGBI

16-31

Page 1007
Image 1007
Motorola BSR 2000 manual Em retry-count 0-16no em retry-count