Release 1.0 | CMTS Commands |
|
|
cable privacy mcast access
The cable privacy mcast access command configures a multicast access list by specifying a cable modem MAC address and the corresponding multicast IP address.
Note: A cable modem MAC address and the corresponding multicast IP address is required.
Group Access
MSO
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
cable privacy mcast access <H.H.H> <A.B.C.D>
Command Syntax
H.H.H | cable modem physical address (MAC) in the |
| form xxxx.xxxx.xxxx |
A.B.C.D | multicast IP address. |
MGBI |
