Motorola BSR 2000 manual Spd override, Addr-selector, Port-selector, Protocol-selector

Release 1.0 PacketCable Commands

spd override

The spd override command is used to override IP addresses, ports, or protocols that are configured in the IPSec Security Policy Database (SPD).

The no spd override is used to remove the address, port, or protocol override.

Group Access

All

Command Mode

IPSec Configuration

Command Line Usage

spd override [addr-selector port-selector protocol-selector]no spd override [addr-selector port-selector protocol-selector]

Command Syntax

addr-selector	SPD overrides a specific IP address within a
	range of IP addresses or a wild card IP
	address set in the SPD.
port-selector	SPD overrides a specific port with a range of
	port(s) or wild card set in the SPD.
protocol-selector	SPD overrides a specific protocol with a
	range of protocol or wild card of protocol set
	in the SPD.

Command Default

No SPD override address selector is configured.

SPD override port selector is configured.

SPD override protocol selector is configured.

526363-001-00 Rev. B MGBI 16-55