Release 1.0

CMTS Commands

 

 

cable upstream trap-enable-if

The cable upstream trap-enable-if command enables the ifLinkUpDownTrapEnable trap for an upstream port. The ifLinkUpDownTrapEnable trap indicates whether a link up or link down trap should be generated. The cable upstream no trap-enable-if command disables the ifLinkUpDownTrapEnable trap.

Group Access

All

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> trap-enable-if no cable upstream <NUM> trap-enable-if

Command Syntax

NUM

Upstream port number.

Command Default

Disabled

526363-001-00 Rev. B

MGBI

11-109

Page 655
Image 655
Motorola BSR 2000 manual Cable upstream trap-enable-if