Motorola BSR 2000 Show controllers, Downstream Display information for Downstream port including

BSR 2000 Command Reference Guide Release 1.0

show controllers

The show controllers command displays detailed hardware and configuration information for each module on installed in the BSR chassis.

Group Access

All

Command Mode

All modes except User EXEC

Command Line Usage

show controllers cable <X/Y> [upstream <0-3> downstream <0-0> mac ] [ {begin exclude include} {<WORD>} [ {count count-only}]]

show controllers cable <X/Y> [upstream <0-3> downstream mac ] [ {count count-only}]

show controllers ethernet [<X/Y>] show controllers gigaether [<X/Y>]

Command Syntax

cable X/Y	display cable interface controller
	information for the specified BSR
	port number including RF signal
	information, the type of hardware
	installed, FEC information for both
	corrected and uncorrected packets,
	the spectrum group and the status of
	the cable interface (X is 0. Y is the
	port number)
downstream 0-0	display information for the
	downstream port including
	downstream modulation type,
	frequency (label), and symbol rate

2-44 MGBI 526363-001-00 Rev. B