Motorola BSR 2000 manual Snr setup

BSR 2000 Command Reference Guide Release 1.0

snr setup

The snr setup command is used to configure SNR measurement on the BCM3138/ BCM3140 chip set.

Group Access

MSO

Command Mode

Privileged EXEC

Command Line Usage

snr setup {<NUM>{<NUM>}} {<5000000-42000000> <5000000-65000000> <5000000-55000000>}{<5000000-42000000> <5000000-65000000> <5000000-55000000>} {1600000 200000 3200000 400000 6400000 800000} [equalization {auto off on} ingress-cancel{auto off on} modulation-type{16qam auto qpsk}]

Note: Depending on the configuration of the BSR 2000, the start and end frequencies will reflect the North American DOCSIS, EURODOCSIS, or J-DOCSIS standards

Command Syntax

NUM	This number is always 0 for the BSR 2000.
NUM	valid upstream port number
5000000-42000000	is the North America standard start frequency
	in Hz
5000000-42000000	is the North America standard end frequency
	in Hz.
5000000-65000000	is the EURODOCSIS standard start
	frequency in Hz
5000000-65000000	is the EURODOCSIS standard start
	frequency in Hz

11-264 MGBI 526363-001-00 Rev. B