Ip access-group, Out | Motorola BSR 2000 guide

Release 1.0	IP Commands

ip access-group

The ip access-groupcommand configures an interface to use an access list. The no ip access-groupcommand does not allow incoming or outgoing packets.

Group Access

ISP

Command Mode

Interface Configuration

ip access-group {<1-199><1300-2699> {in out} no ip access-group {<1-199><1300-2699> {in out}

1-199	Standard number range from 1 to 199.
1300-2699	Extended number range from 1300 to 2699.
in	Incoming packet is processed only if the
	source-address is in the access-list.
out	Same as in, outgoing packet is processed only
	if access-list permits the packet.

Command Default

No access groups defined.

526363-001-00 Rev. B

2-15