BSR 2000 Command Reference Guide | Release 1.0 |
|
|
cable modem dcc
The cable modem dcc command allows an operator to manually move DOCSIS 1.1 and 2.0 cable modems ot MTAs to a specified upstream and/or downstream port and logical channel using DOCSIS Dynamic Channel Change (DCC).
Note: The upstream channel must be physically connected for DOCSIS 1.1 and 2.0 cable modems to be manually moved.
When moving a CM or MTA to a different downstream or upstream channel , the upstream channel must be specified first followed by the downstream channel.
The same
Group Access
MSO
Command Mode
Privileged EXEC
Command Line Usage
cable modem {<mac> <prefix>} dcc [upstream <0-7>/<0-3> [init-tech <0-4> ]]
Command Syntax
mac | the cable modem MAC address in the form of |
| xxxx.xxxx.xxxx |
prefix | the cable modem IP address |
MGBI |
