Motorola BSR 2000 manual Show cable modem time-registered

BSR 2000 Command Reference Guide Release 1.0

show cable modem time-registered

The show cable modem time-registeredcommand displays how long a cable modem has been registered. This command can be used to specify individual cable modems, cable modems associated with a particular BSR 2000 chassis slot, or cable modems associated with a particular Spectrum Group. The following information is provided:

Interface	cable modem interface with active
	connection
Connect State	describes the connectivity state of a cable
	modem. The table below describes the 20
	cable modem connectivity states
	supported on the BSR.
Mac Address	cable modem Media Access Control layer
	address
Registration Time	the length of time a cable modem has been
	registered in ddd:hh:mm:ss format
Spectrum Group	the associated Spectrum Group name

Cable modem connectivity states are as follows:

online	CM registered; enabled for data.
online(d)	CM registered, but network access for the
	CM is disabled.
online(un)	CM registered, but not enabled data. Fail
	to verify modem's identity by BPI module.
online(pk)	CM registered; baseline privacy interface
	(BPI) enabled, and key encryption key
	(KEK) is assigned.
online(pt)	CM registered; BPI enabled, and traffic
	encryption key (TEK) is assigned.
reject(m)	CM did attempt to register; registration
	was refused due to bad mic.

11-206 MGBI 526363-001-00 Rev. B