Release 1.0 | IP Commands |
|
|
ip irdp
The ip irdp command enables the ICMP Router Discovery Protocol (IRDP) on an interface. The no ip irdp command disables the ICMP IRDP on an interface.
Group Access
ISP
Command Mode
Interface Configuration (Ethernet and Gigabit Ethernet interfaces only)
Command Line Usage
ip irdp [address <A.B.C.D> holdtime
no ip irdp [address <A.B.C.D> holdtime
Command Syntax
address | IP addresses to |
| value. |
A.B.C.D | IP address to advertise. |
holdtime | amount of time, in seconds, advertisements |
| hold valid |
value in seconds | |
maxadvertinterval | maximum time between advertisements |
value in seconds | |
minadvertinterval | minimal time between advertisement in |
| seconds |
multicast | advertisements are sent with multicast |
MGBI |
