Motorola BSR 2000 manual Version 1 2 no version

BSR 2000 Command Reference Guide Release 1.0

version

The version command specifies the routing RIP version. The no version command disables the routing RIP version and resets the default.

Use the ip rip receive version and the ip rip send version commands to specify versions per interface.

Note: The basic timers for RIP are adjustable, but must be the same for all routers and servers on the network to execute a distributed, asynchronous routing algorithm. When the route-timeout timer expires, the route is marked invalid but is retained in the table until the route-flush timer expires.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

version {1 2} no version

Command Syntax

1	RIP version 1
2	RIP version 2

Command Default

RIP receives version 1 and 2, but sends only version 1

7-30 MGBI 526363-001-00 Rev. B