BSR 2000 Command Reference Guide | Release 1.0 |
|
|
interface
The interface command specifies an interface for further configuration. Once the interface is selected you enter Interface configuration mode.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
interface {cable <X/Y> ethernet <X/Y> gigaether <X/Y> loopback <1-64>}
Command Syntax
cable X/Y | CMTS that provides 1 downstream channel |
| and 4 upstream channels. Commonly referred |
| to as the cable interface. |
ethernet X/Y | On the BSR 2000, Ethernet interface 0 is a 10 |
| Mbps management interface that does not |
| support the negotiation feature. |
| Ethernet ports 1 and 2 are typically used to |
| support an external T1/E1 BITS clock. (X is |
| always 0, Y is the port number) |
gigaether X/Y | Provides two 1000 Mbps optical Ethernet |
| interfaces (X is always 0, Y is the port |
| number) |
loopback | Loopback interfaces are used to act as |
| inbound logical interfaces when physical |
| interfaces go down. |
MGBI |
