Release 1.0 | CMTS Commands |
|
|
show cable modem unregistered
The show cable modem unregistered command displays the following information about unregistered cable modems:
Interface | cable modem interface with active |
| connection |
Prim Sid | Primary Service Identifier number |
Connect State | describes the connectivity state of a cable |
| modem. The table below describes the 20 |
| cable modem connectivity states |
| supported on the BSR. |
Timing Offset | current cable modem timing adjustment |
Rec Power | cable modem receive downstream power |
| level in dbmv |
Ip address | cable modem IP address |
Mac address | cable modem Media Access Control layer |
| address |
Cable modem connectivity states are as follows:
init(r1) | CM sent initial ranging parameters. |
init(r2) | CM is ranging. |
init(rc) | ranging is complete. |
dhcp(d) | DHCP Discover was sent by CM. |
dhcp(o) | DHCP Offer was received. |
dhcp(req) | DHCP Request was sent by CM. |
dhcp(ack) | DHCP Ack was received, IP address was |
| assigned by DHCP server. |
init(o) | option file transfer was started. |
init(t) | |
offline | CM is considered to be offline. |
MGBI |
