Motorola BSR 2000 manual Cable concatenation, Docsis-1.0, Cable modems only, Docsis-1.1

Release 1.0 CMTS Commands

cable concatenation

The cable concatenation command enables or disables concatenation for DOCSIS

1.0or DOCSIS 1.1 cable modems. The no cable concatenation command restores the default setting.

Note: Concatenation must be enabled globally with the cable upstream concatenation command before any setting specified with the cable concatenation command is valid. Once concatenation is enabled globally, the cable concatenation command will enable or disable concatentation for DOCSIS 1.0 and 1.1 cable modems only and concatenation will always be enabled for DOCSIS 2.0 cable modems regardless of any setting specified with this command.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable concatenation { docsis-1.0 docsis-1.1 } no cable concatenation { docsis-1.0 docsis-1.1 }

Command Syntax

docsis-1.0	concatenation is enabled for DOCSIS 1.0
	cable modems only
docsis-1.1	concatenation is enabled for DOCSIS 1.1
	cable modems only

Command Default

Concatenation is enabled for DOCSIS 1.0, 1.1, and 2.0 cable modems if concatenation is globally enabled with the cable upstream concatenation command.

526363-001-00 Rev. B MGBI 11-5