BSR 2000 Command Reference Guide | Release 1.0 |
|
|
enable password
The enable password command allows you to specify a password associated with the enable command. After specifying the password, entering the enable command at the User EXEC prompt causes the system to prompt you for the password. You must supply the password to enter the Privileged EXEC mode. The no enable password command deletes the password.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
enable password <LINE>
enable password {0 7 } <WORD> no enable password
Command Syntax
LINE | the password (31 character |
| maximum) - enclosed with double |
| quotes if the password contains |
| spaces). The "%" and "!" characters |
| must not be used. |
0 | specifies an UNENCRYPTED |
| password |
7 | specifies a HIDDEN password |
WORD | the UNENCRYPTED or HIDDEN |
| 'enable' password |
MGBI |