BSR 2000 Command Reference Guide | Release 1.0 |
|
|
dhcp throttle on
The dhcp throttle on command enables DHCP Rate Limiting for all CMs or CPEs. The no dhcp throttle on command disables DHCP Rate Limiting for all CMs or CPEs.
Note: Once enabled for either CPEs, CMs, or both types of devices, rate limiting applies to all DHCP Request/Discover packets on a per device basis. The DHCP Rate Limiting feature does not support specifying a particular device for which rate limiting will be applied.
Group Access
All
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
dhcp throttle {cm cpe} on no dhcp throttle {cm cpe} on
Command Syntax
cm | enable DHCP packet rate limiting for all |
| CMs. |
cpe | enable DHCP packet rate limiting for all |
| CPEs. |
Command Default
Disabled
MGBI |
