Motorola BSR 2000 manual Offset-list, Any

BSR 2000 Command Reference Guide Release 1.0

offset-list

The offset-listcommand adds an offset to incoming and outgoing metrics to routes learned via RIP. The offset value is added to the routing metric. An offset-list with an interface slot/port is considered extended and takes precedence over an offset-list that is not extended. The no offset-listcommand removes the offset for incoming and outgoing metrics to routes learned via RIP.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

offset-list {1-99} [any] {in out} <0-16> [cable <X/Y> ethernet <X/Y > gigaether <X/Y>]

no offset-list {1-99} [any] {in out} <0-16> [cable <X/Y> ethernet <X/Y > gigaether <X/Y>]

Command Syntax

1-99	standard access-list-number, if 0, no action is
	taken
any	apply offset to all networks
in	apply the offset to incoming metrics
out	apply the offset list to outgoing metrics
0-16	positive offset to be applied to metrics for
	networks matching the access list, if set to 0,
	no action is taken
cable X/Y	X is 0. Y is the cable interface port number to
	which the offset-list is applied.

7-18 MGBI 526363-001-00 Rev. B