BSR 2000 Command Reference Guide

Release 1.0

 

 

snmp-server notify

The snmp-server notify command specifies the target addresses for notifications by setting the snmpNotifyName object in the snmpNotifyTable and the snmpNotifyTag object in the snmpTargetAddrTable.

The snmpNotifyTable contains entries which are used to select which entries in the snmpTargetAddrTable should be used for generating notifications and the type of notifications to be generated.

Group Access

System Administrator

Command Mode

Global Configuration

Command Line Usage

snmp-server notify <octet-string><octet-string>{inform trap} {nonvolatile volatile} [active not-in-service ]

no snmp-server notify <octet-string>

Command Syntax

octet-string

specifies the snmpNotifyName (index into the

 

snmpNotifyTable) which is a unique identifier

 

associated with this snmpNotifyEntry

octet-string

specifies the snmpNotifyTag object which is

 

used to select entries in the

 

snmpTargetAddrTable

inform

send Inform notification messages to the host

 

identified in the snmpTargetAddrTable

 

through the corresponding snmpNotifyTag

trap

send Trap notification messages to the host

 

identified in the snmpTargetAddrTable

 

through the corresponding snmpNotifyTag

3-28

MGBI

526363-001-00 Rev. B

Page 316
Image 316
Motorola BSR 2000 manual Snmp-server notify, Inform, Trap