Motorola BSR 2000 manual Access-list standard, No access-list, Deny, Permit, Any

Release 1.0 Access List Commands

access-list (standard)

The standard access-listcommand defines a standard access list to configure and control the flow of routing information and traffic by matching a packet with a permit or deny result. The no access-listcommand deletes the access-list.

Use the access-listcommand to restrict routing update information; control the transmission of packets on an interface, or control virtual terminal line access.

Group Access

ISP

Command Mode

Global Configuration

Command Line Usage

access-list<1-99><1300-1999> {deny permit} {<A.B.C.D> [<A.B.C.D>] any host <A.B.C.D>}

no access-list <1-99><1300-1999>

Command Syntax

1-99	standard access list
1300-1999	standard IP access list (expanded range)
deny	deny access if conditions are matched
permit	permit access if conditions are matched
A.B.C.D	address to match
A.B.C.D	wildcard bits
any	any source host
host A.B.C.D	a single source host

526363-001-00 Rev. B MGBI 5-3