
Release 1.0 | RIP Commands |
|
|
network
The RIP version of the network command enables networks for the routing process. The no network command disables networks for the RIP routing process.
Note: If a network with RIP is not specified, the system does not advertise the network in any RIP routes.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
network <A.B.C.D> [<A.B.C.D>] no network <A.B.C.D [<A.B.C.D>]
Command Syntax
A.B.C.D | IP address of directly connected networks |
A.B.C.D | associated IP address of the removed routes, |
| subnet mask |
MGBI |