
Release 1.0 | CMTS Commands |
|
|
clear cable modem
The clear cable modem command is used to either clear the traffic counters or reset a single cable modem or all cable modems connected to the BSR. The clear cable modem command options can be used to do the following:
■
■
■
■
Clear or reset a single cable modem by using its MAC address. Clear or reset specific group of cable modems.
Clear or reset a single cable modem by using its IP address. Clear or reset all cable modems.
Group Access
MSO
Command Mode
Privileged EXEC
Command Line Usage
clear cable modem {<mac> [<mac>] <prefix> all } {counters reset }
Command Syntax
mac | the cable modem’s MAC address |
mac | a MAC address mask that specifies a group of |
| cable modems |
prefix | the cable modem’s IP address |
all | clear the cable modem traffic counters or |
| reset all cable modems |
counters | clear the cable modem traffic counters |
reset | reset the cable modem |
MGBI |